✨ New Arrivals Just Dropped!Explore
$384.90
Original: $1,283.00
-70%Comp Cams Stage 2 Camshaft 2009-2023 Challenger/Charger 5.7L/6.4L/392—
$1,283.00
$384.90The Story
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
- Cam Style:Hydraulic roller tappet
- Camshaft Use:Street/Strip
- Basic Operating RPM Range:2,500-6,500
- Intake Duration at 050 inch Lift:220
- Exhaust Duration at 050 inch Lift:230
- Duration at 050 inch Lift:220 int./230 exh.
- Advertised Intake Duration:273
- Advertised Exhaust Duration:279
- Advertised Duration:273 int./279 exh.
- Intake Valve Lift with Factory Rocker Arm Ratio:0.596 in.
- Exhaust Valve Lift with Factory Rocker Arm Ratio:0.582 in.
- Lobe Separation (degrees):114
- Computer-Controlled Compatible:Yes
- Valve Springs Required:No
- Quantity:Sold individually.
- Notes:Stage 2.
Description
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
- Cam Style:Hydraulic roller tappet
- Camshaft Use:Street/Strip
- Basic Operating RPM Range:2,500-6,500
- Intake Duration at 050 inch Lift:220
- Exhaust Duration at 050 inch Lift:230
- Duration at 050 inch Lift:220 int./230 exh.
- Advertised Intake Duration:273
- Advertised Exhaust Duration:279
- Advertised Duration:273 int./279 exh.
- Intake Valve Lift with Factory Rocker Arm Ratio:0.596 in.
- Exhaust Valve Lift with Factory Rocker Arm Ratio:0.582 in.
- Lobe Separation (degrees):114
- Computer-Controlled Compatible:Yes
- Valve Springs Required:No
- Quantity:Sold individually.
- Notes:Stage 2.
